ACCESS GATEWAY
System Administration 169
1. From the Web Management Interface, click on Subscriber Administration, then Delete
by MAC. The Delete a Subscriber Profile (by MAC) screen appears:
2. In the Enter MAC Address field, enter the MAC address of the profile you want to delete.
3. Click on the Delete button to delete this subscriber profile, or click on the Reset button if
you want to reset the “MAC Address” value to the 00 state.
Deleting Subscriber Profiles by User Name {Delete by User}
This procedure shows you how to delete a subscriber profile from the Access Gateway’s
database of authorized subscribers, based on the profile’s user name.
1. From the Web Management Interface, click on Subscriber Administration, then Delete
by User. The Delete a Subscriber Profile (by User) screen appears:
2. In the Username field, enter the user name of the profile you want to delete.
3. Click on the Delete button to delete this subscriber profile, or click on the Reset button if
you want to reset the “Username” value to its blank state.
To see a current listing of the subscriber database, sorted by user name, go to
“Listing Subscriber Profiles by User Name {List by User}” on page 173.
To Next Page
Loading...
