ACCESS GATEWAY
210 System Administration
This procedure shows you how to enable the Bridge Mode option.
1. From the Web Management Interface, click on System, then Bridge Mode. The Bridge
Mode (Passthrough) Settings screen appears:
2. Click on the check box for Bridge Mode to enable this feature.
3. If you want the changes to take effect immediately, Select Yes to "Reboot immediately
after changes are saved".
4. Click on the Submit button to save your changes, or click on the Reset button if you want
to reset the “Enable” option to its previous state.
Exporting Configuration Settings to the Archive File {Export}
This procedure shows you how to export the current system authentication settings to an
archive file for future retrieval. This function is useful if you want to change the configuration
settings and you are unsure of the effect that the changes will have. You can restore the
archived system configuration settings at any time with the import function.
The Access Gateway should be rebooted if this setting is changed.
To Next Page
Loading...
