ACCESS GATEWAY
System Administration 155
Deleting Port-Location Assignments by Port {Delete by Port}
This procedure shows you how to delete a port-location assignment, based on its port. The
Access Gateway prompts you to confirm this action before deleting the requested port-
location.
1. From the Web Management Interface, click on Port-Location, then Delete by Port. The
Delete Port-Location Assignments by Port screen appears:
2. In the Port field, enter the port of the assignment you want to delete.
3. Click on the Delete button to delete the specified port-location assignment, or click on the
Reset button if you want to reset the “port” value to its blank state.
Exporting Port-Location Assignments {Export}
This procedure shows you how to export your current port-location assignments to the
“location.txt” file. The location.txt file is stored in: /flash/location.txt (resident in the Access
Gateway’s flash memory).
If you are unsure which port-locations are currently mapped to the system, you
can view a list at “Displaying the Port-Location Mappings {List}” on page 161.
The “port” is the VLAN ID (when using 802.1Q 2-way).
Exporting your current port-location assignments to the Access Gateway’s flash
memory will overwrite the existing location.txt file.
To Next Page
Loading...
