Nomadix Access Gateways - Default (Factory) Configuration Settings

ACCESS GATEWAY
250 Quick Reference Guide
Default (Factory) Configuration Settings
The following table shows a partial listing of the Access Gateway’s primary default
configuration settings (the settings established at manufacturing). For a complete listing of the
factory default settings, refer to the factory.txt file. For more information, go to “Importing the
Factory Defaults {Factory}” on page 211.
Function Default Setting
Operating System Version
NSE ID
Network Interface MAC
Subscriber Interface MAC
Vx.x.xxx (current firmware version)
Last six digits of Network Interface MAC
MAC address is unique for each product
MAC address is unique for each product
Network Interface IP
Subnet Mask
Default Gateway IP
DHCP Client
Admin IP
10.0.0.10
255.255.255.0
10.0.0.1
Enabled
172.30.30.172
Domain
Host Name
Primary DNS
Secondary DNS
Tertiary DNS
nomadix.
AGxxxx (depending on product)
0.0.0.2
0.0.0.0
0.0.0.0
DHCP Relay
External DHCP Server IP
DHCP Relay Agent IP
DHCP Server
DHCP Server IP
DHCP Subnet Mask
DHCP Pool Start IP
DHCP Pool End IP
Lease Duration Minutes
Disabled
0.0.0.0
0.0.0.0
Enabled
10.0.0.4
255.255.255.0
10.0.0.12
10.0.0.250
1440
Home Page Redirection
Parameter Passing
Redirection Frequency Minutes
Disabled
Disabled
3600
Dynamic Address Translation
(DAT)
Enabled (cannot be changed)