ACCESS GATEWAY
212 System Administration
1. From the Web Management Interface, click on System, then Factory. The Factory
Configuration screen appears:
2. Click on the Submit and Reboot button to replace the current system configuration
settings with the factory default settings and reboot the Access Gateway.
Defining the Fail Over Options {Fail Over}
Many large scale networks require fail-over support for all devices in the public access
network. The Fail Over Options feature allows two Nomadix Gateways to act as siblings,
where one device will take up the users should the other device become disconnected from the
network. As part of this functionality, the settings (except IP addresses) between the two
devices will be synchronized automatically.
Your product license may not support this feature.
To Next Page
Loading...
