ACCESS GATEWAY
158 System Administration
Finding Port-Location Assignments by Port {Find by Port}
This procedure shows you how to find a port-location assignment, based on its port. This
procedure is useful if you want to review the details of a specific port-location. You can also
find port-locations based on their description or location.
1. From the Web Management Interface, click on Port-Location, then Find by Port. The
Find a Port-Location Assignment by Port screen appears:
2. In the Enter Port field, enter the port you want to find.
3. Click on the Show button to view the Process Port-Location Assignments screen, or click
on the
Reset button if you want to reset the “port” value to its blank state.
From this screen you can add, update or delete port-location assignments.
The “port” is the VLAN ID (when using 802.1Q 2-way).
To Next Page
Loading...
