ACCESS GATEWAY
102 System Administration
2. You have the option of disabling PMS services by clicking on the PMS services disabled
radio button, then clicking on the
Submit button to save your choice. If you disable PMS
services you can exit this procedure, otherwise go to Step 3.
3. Select the Type of PMS (Pre-paid or Post-paid) you require from the available list, or
choose the
ASCII Serial Printer option (when a serial printer is connected to the Access
Gateway’s serial port)—you can choose only one of the listed options.
If you choose HOBIC - RSI, you must select the Type of Access.
For Marriott, you can either choose Marriott or you can choose a type of WFB
interface (Post Only, Query and Post, or Name and Room).
If you choose Micros Fidelio (Post Only with TCP/IP), you must provide the Target
IP Address and the Target Port Number.
If you choose Micros (1700/2000/3700/4700/8700 emulation) you must provide the
following additional information:
Communications System Unit Number (1 - 64)
Communications System Name
Store Revenue Center Number: Internet Access
Store Revenue Center Number: Other
You also have the following check box options (see note):
Match Last Name Only
Skip First Char in Last Name
OnQ Compliant (Enable this option if you want to use Nomadix Micros POS
emulation to query & post to Hilton Corporation's OnQ PMS system).
The pre-paid option requires hotel guests to “pre-pay” for services. The post-paid
option allows hotel guests to terminate their connection (via the ICC) and be
billed only for the actual time they are online. The NH proprietary PMS is offered
on a “post-paid” basis only.
To Next Page
Loading...
