ACCESS GATEWAY
166 System Administration
1. From the Web Management Interface, click on Subscriber Administration, then Add.
The Add a Subscriber Profile to the Database screen appears:
2. Choose the Group Account type for this profile.
3. Define the DHCP Address Type: Public or Private (only used when the IP Upsell feature
is enabled, otherwise leave this set to “private”).
4. Enter a valid Subnet address for this subscriber.
5. In the Username field, enter a user name for this subscriber.
6. If you assigned a user name, you must now assign a Password.
7. In the Expiration Time field, define the duration (in hours and minutes) for the
subscriber’s authorized access time. When the assigned time expires, the subscriber must
“re-subscribe” to the service.
8. Enter an amount in the Paid field.
9. The next two fields (User Definable 1 and User Definable 2) are optional. Use these
fields for simple notations about the subscriber.
User names and passwords are required for Group Accounts.
To Next Page
Loading...
