ACCESS GATEWAY
System Administration 73
1. From the Web Management Interface, click on Configuration, then DHCP. The DHCP
Settings screen appears:
2. DHCP Services is enabled by default. Do not disable it unless you want to lose all your
DHCP services.
Nomadix’ patented Dynamic Address Translation (DAT) functionality is
automatically configured to facilitate “plug-and-play” access to subscribers who
are misconfigured with static (permanent) IP addresses, or subscribers that do
not have DHCP capability on their computers. DAT allows all users to obtain
network access, regardless of their computer’s network settings.
By default, the Access Gateway is configured to act as its own DHCP server and
the relay feature is disabled. If you want the Access Gateway to act as its own
DHCP server, do not enable the relay. Go directly to Step 8.
To Next Page
Loading...
