Adhesive Tracking System
D-5
Part 1128350_02
E 2020 Nordson Corporation
Technical Data
Specifications
Item Specification
Maximum system operating
pressure
10 MPa (1,450 psi)
Instantaneous flow rate range 0.03 – 91 kg/hr (0.07–200.6 lb/hr) (assuming SG* = 1.0)
Displacement 1.0 cc/rev = 1 g/rev = 0.001 kg/rev = 0.0022 lb/rev (assuming SG* = 1.0)
Resolution 0.025 cc (25 mg) or (0.055 lb) (assuming SG* = 1.0)
Viscosity range 600 – 10,000 mPa-s (cP)
Output signals 2 (Enabled Output and Alarm Output)
24 VDC sourcing (PNP)
25 mA each
Flow meter construction Gears: 86L20 steel, case-hardened
Gear shafts: Carbon steel, hardened and grounded (DIN 6325, M6)
Body: 316 stainless steel
Flow meter sensors Inductance: 1 mH (+/-10%)
Resistance: 15 ohm (+/-10%)
Frequency: 60 kHz (+/-10%)
Temperature rating 204 _C(400_F) maximum
Working temperature range -5–50 _C (23 – 122 _F)
*SG = specific gravity
To Next Page
Loading...
