Nordson ProBlue Flex - Preparing the Transformer for Installation

ProBlue Flex 400/480 Volt Transformer
F-9
Part 1128350_02
E 2020 Nordson Corporation
Preparing the Transformer for Installation
See Figures F-5 and F-6.
1. Unfasten the two screws to remove the transformer cover.
NOTE: The cover is connected to the transformer chassis by a ground
lead.
2. Disconnect the ground lead from the transformer chassis to the ground
connection inside the transformer cover.
1
2
3
Figure F-5 Preparing the transformer for installation
1. Transformer cover 2. Transformer cover screws 3. Transformer ground wire