Nordson ProBlue Flex - Wi-Fi Module

Optional Accessories
E-3
Part 1128350_02
E 2020 Nordson Corporation
Wi-Fi Module
The Wi-Fi card is installed on the LVC board's DB15 female connector. This
card functions as a Wi-Fi Access Point (AP) and allows wireless access to
the BBconn Cloud web page user interface. The figure on the left displays
the Wi-Fi card.
When installed on the LVC board, the software automatically detects the
Wi-Fi module presence at startup and loads i t with the necessary software
driver. In addition, if the melter does not have an external web a ccess
license, it will automatically be marked as having a license based on having
detected module presence.
Several configuration settings must be changed to configure the Wi-Fi AP.
These configuration parameters are available in:
- BBconn Cloud (required usage for OEM units), for accessing the web
page go to https://bbconncloud.nordson.com
:
Settings > Networking
and
- Navigable menus of the OLED user interface:
Home screen > System S ettings > Networking > Wi-Fi
Refer to the Wi-Fi Card instruction sheet included in the service kit for
installation details.
Wi-Fi Module Service Kit
Kit Part Part Description Quantity
1129094 — KIT,ACCESS,PB FLEX,WIFI CARD —
------ S PCA,PB FLEX,WIFI 1
------ S CARTON,MISCPARTS(6"X4"X2") 1