Optional Accessories
E-10
Part 1128350_02
E 2020 Nordson Corporation
Fulfill System
The ProBlue Flex melters that are integrated with the Fulfill system,
automatically transfer solid adhesive stored in an a dhesive bin to the melter
as needed. A vibrator on the adhesive bin helps prevent adhesive bridging
and ensures consistent adhesive delivery from the bin to the melter.
1
2
3
Figure E-2 ProBlue Flex melter integrated with the Fulfill system
1. ProBlue Flex adhesive melter with Fill
System
2. Adhesive transfer hose 3. Adhesive storage bin
Dimensions
For melter dimensions, refer to the following sections given earlier in this
manual before installing the fulfill system:
- Melter Clearances in Installation (Section 3)
- Melter Dimensions in Te chnical Data (Section 7)
To Next Page
Loading...
