Nordson ProBlue Flex - Appendix F ProBlue Flex 400;480 Volt Transformer

ProBlue Flex 400/480 Volt Transformer
F-1
Part 1128350_02
E 2020 Nordson Corporation
Appendix F
ProBlue Flex 400/480 Volt Transformer
Overview
The ProBlue Flex adhesive melter is installed directly above the ProBlue Flex
400/480 volt transformer. The 400/480 volt transformer provides the ability to
operate the melter up to 480 VAC.
The transformers are shipped separately from the ProBlue Flex adhesive
melters. These come with an installation kit, which in addition to the ship-with
kit components also includes an instruction manual. The manual contains the
following key information:
S Transformer sizing guidance
S Installing the transformer on the parent machine or support structure
S Troubleshooting the transformer
S Transformer p arts and service kits
S Wiring diagrams
For installation, operation, troubleshooting, and parts information of the
ProBlue Flex adhesive melter, refer t o the Core ProBlue Flex Adhesive
Melter manual (P/N 1128350).
For detailed user interface setup instructions refer to:
- ProBlue Flex Adhesive Melter Using t he OLED User Interface manual
(P/N 1128351).
And/Or
- ProBlue Flex Adhesive Melter OEM User Interface manual
(P/N 1129255).