Description
2-6
Part 1128350_02
E 2020 Nordson Corporation
Residual Risks
In the design of the unit, every measure is taken to protect personnel from
potential danger. However, some residual risks cannot be avoided, such as:
S Burns from hot material
S Burns when filling the tank, from the tank lid, and from the tank lid
supports
S Burns when conducting maintenance and repair work for which the
melter must be heated up
S Burns when attaching and removing heated hoses
S Inhaling potentially hazardous material fumes
S Damage to cables/lines belonging t o the customer if they were
installed such that they come into contact with hot or rotating parts
S Automatic Pressure Discharge (APD) valve malfunction due to
hardened or charred material
Experience of Installation Personnel
Theinstructionsprovidedinthissectionareintendedtobeusedby
personnel who have experience in the following subjects:
S Hotmeltapplicationprocesses
S Industrial power and control wiring
S Industrial mechanical installation practices
S Basic process control and instrumentation
To Next Page
Loading...
