Optional Accessories
E-1
Part 1128350_02
E 2020 Nordson Corporation
Appendix E
Optional Accessories
Available Accessories
The ProBlue adhesive melter can either come configured with the selected
optional accessories or they can be retrofitted onto the melter. The following
optional accessories are available for use with the melter:
S Air Pressure Relief Valve
S Wi-Fi Module
S Light Tower
S Communication cards
S Remote Touchscreen User Interface
S Fulfill System
NOTE: For board diagrams, refer to Wiring Diagrams in Technical Data
(Section 7) given earlier in this manual.
To Next Page
Loading...
