Hose/Applicator Expansion Base
G-5
Part 1128350_02
E 2020 Nordson Corporation
5. OpentheE-Boxenclosuredoorandremovethesideenclosurepanelto
the chassis cover plate and chassis-to-sub-base ground wire.
Seefigureontheleft(E-Boxenclosuredoorandsideenclosurepanel
highlighted in grey).
6. See Figure G-4. To disconnect the ground wire from the chassis to
sub-base, do the following:
a. Remove the chassis cover plate screw, and remove and retain the
cover plate.
b. Locatethegroundwirefromthesub-baseanddisconnectitfromthe
chassis.
3
4
5
6
1
2
Figure G-4 Disconnecting ground wire
1. Sub-base
2. Chassis
3. Chassis cover plate screw
4. Cover plate (removed)
5. Sub-base ground wire
connection
6. Chassis ground wire
connection
To Next Page
Loading...
