NTI ENTERPRISE ENVIRONMENT MONITORING SYSTEM
122
MOBILE SUMMARY PAGE
The user can login to the ENVIROMUX through the browser on a smart phone or similar device to view a Summary Page for the
sensor status (below). To login, type the current IP address of the ENVIROMUX into the address bar of the browser (default IP
address used in the example below):
Note: The ENVIROMUX must have a public accessible IP address for this to work or your browsing device must
connected to the same local network as the ENVIROMUX.
Note: If the HTTP Server Port number is changed (page 76) from port 80 (default), then the port number will need to be
added to the IP address (i.e. if the port number is changed to 95, then the IP address would be http://192.168.1.21:95)
A log in prompt requiring a username and password will appear:
Username = root
Password = nti
(lower case letters only)
Note: usernames and passwords are case sensitive
Figure 136- Mobile Login page
With a successful login, a screen similar to the following will appear.
This is the only information that can be accessed through the interface.
Select “Refresh” to refresh the information on the display. Select “Log
out” when you are finished viewing the information. For access to the
complete web interface, select “Full Version”.
Note: The display will refresh automatically every 15 seconds
Figure 137- Mobile Summary page
http://192.168.1.21/
To Next Page
Loading...
Need help?
General
