NTI ENVIROMUX Series User Manual

NTI ENTERPRISE ENVIRONMENT MONITORING SYSTEM
13
Alarm(Beacon/Siren) Connections
Terminals have been provided for connection of the E-BCN-R Beacon and E-SRN-M Siren to use for visual alerts and audible
alerts when configured. Devices such as this can be installed in locations best suited to get attention. The terminals for
these connections will accept 16-26 AWG wire.
Note: The maximum combined load that can be
connected to the “AUX PWR” terminals on the
E-5D / -2D is 500mA. (For the
E-16D the maximum is 150mA.)
Figure 12- Connect visual and audible external indicators

NTI ENVIROMUX Series Specifications

General

Product Type	Environmental Monitoring System
Temperature Range	-40°C to 85°C
Power Supply	12V DC or 24V AC
Network Interface	Ethernet 10/100 Mbps
Alarm Notifications	Email, SNMP
Sensor Types Supported	Temperature, Humidity, Water, Airflow
Power	12V DC or 24V AC
Operating Temperature	-40°C to 85°C
Mounting	Wall or Rack Mount
Communication Interfaces	Ethernet
Data Logging	Yes
Compliance	CE, RoHS