NTI ENTERPRISE ENVIRONMENT MONITORING SYSTEM
65
If you Enable HTTP
Authentication, you must
also enter the Authentication
Username and Password that
your camera has been
confi
ured to accept.
Figure 70- IP Camera Configuration
The images from web cameras can also be associated with alert messages. When configured (page 45), an image from an IP
camera can be taken and sent along with a sensor alert message via email and/or saved to a connected USB flashdrive.
Note: If your camera’s security can be disabled, and you don’t want to use it to be able to send IP camera captures as e-
mail attachments, then disable it. The “Enable HTTP Auth” and “Enable digest Access” features are provided for
cameras the require authentication to view images or send images via email. Consult your IP camera manual to see if
this feature is present and for instructions on how to configure this.
For available cameras compatible with the E-xD, visit our website at http://www.networktechinc.com/ip-camera.html
Once this is configured, test to
see if images come via email.
(See below)
If not, your camera may require
“Digest Access Authentication”
to work. In this case, place a
checkmark in “Enable
Digest Access”.
Caution: Don’t enable this
unless it is necessary,
because if it isn’t needed,
you won’t get emails from
cameras that don’t
support this feature.
To Next Page
Loading...
Need help?
General
