NTI ENTERPRISE ENVIRONMENT MONITORING SYSTEM
84
Account Settings Description
Username Enter the desired username for this user
Admin Place a checkmark here if this user should have administrative privileges
Operator Place a checkmark here if this user should have operator privileges
Enabled Place a checkmark here to enable this user to access the ENVIROMUX
Password Enter a password that a user must use to login to the system
A password must be assigned for the user’s login to be valid
Passwords must be at least 1 keyboard character.
Confirm Re-enter a password that a user must use to login to the system
Title Enter information as applicable
Department Enter information as applicable
Company Enter information as applicable
Group Settings
Group 1-8 Place a checkmark if the user should receive messages from sensors, accessories, or IP
devices in Group 1, 2, 3… thru 8 (see also pages 42 and 57 for group assignments)
LDAP Account Settings
Common Name (for LDAP)
“Common Name” assigned in the LDAP server account in an Active Directory. Often a name
assigned that is different than the Username. If this is the same as the Username in the
“Account Settings” (above), this can be left blank.
Organizational Unit (for LDAP)
Enter the Organizational Unit the user belongs to in an Active Directory
Format is <ou,ou,etc> (like example in Figure 95)
Contact Settings
Email alerts Place a checkmark if the user should receive messages via email
Brief email Place a checkmark if email messages should be brief (contain only critical information)
Note: Enabling this will also prevent images being sent from IP cameras to this user
Email address Enter a valid email address if this user should receive email alert messages (1 address only,
maximum 63 characters)
Tip: The user can receive alert messages to their cell phone (SMS) by entering the cell carrier's
email address here (i.e. 1234567890@vtext.com for Verizon) in the absence of a modem.
Sound Alerts Place a checkmark if the user wants to be notified of an alert through their PC with an audible
sound. User must be logged in to the Web Interface and the Summary Page displayed.
Syslog alerts Place a checkmark if the user should receive alerts via syslog messages
Syslog facility Select a Syslog Facility for the messages to be sent to- Local0 thru Local7 (default is Local0).
SNMP traps Place a checkmark if the user should receive alerts via SNMP traps
Syslog/SNMP IP address Enter a valid syslog/SNMP IP address for the user to receive syslog/SNMP messages
SMS Alerts Place a checkmark if the user should receive alerts via SMS messages (requires a modem)
SMS Number Enter up to 4 different phone numbers to call to alert the user via SMS message
Figure 96- More user settings
To Next Page
Loading...
Need help?
General
