NTI ENVIROMUX Series User Manual

NTI ENTERPRISE ENVIRONMENT MONITORING SYSTEM
80
XOAUTH Settings
On the Network Configuration page is a section for XOAUTH Settings, used to enable automatic user authentication verification
when the SMTP server requires XOAUTH2 authentication (i.e. Gmail).
Note: Make sure your SMTP settings are entered correctly (username, password, “Use Authentication” is checked, etc.)
before proceeding (page 75).
1. First place a checkmark in the box under SMTP settings to enable the use of XOAUTH authentication (page 75). Click “Save”
at the bottom of the page to apply this change.
Notes: If your SMTP Server port is set to 587, make sure “Use STARTTLS” is checked (page 75).
If your SMTP Server port is set to 465, make sure “Use SSL” is checked.
Do NOT set the Server port to 25 when using XOAUTH.
2. Next click on “Generate Verification URL” under XOAUTH Settings.
Figure 89- XOAUTH- Generate Verification URL
3. A lengthy URL address will be generated. Copy and paste the entire URL into your browser.
Figure 90- XOAUTH- Copy Verification URL

NTI ENVIROMUX Series Specifications

General

Product Type	Environmental Monitoring System
Temperature Range	-40°C to 85°C
Power Supply	12V DC or 24V AC
Network Interface	Ethernet 10/100 Mbps
Alarm Notifications	Email, SNMP
Sensor Types Supported	Temperature, Humidity, Water, Airflow
Power	12V DC or 24V AC
Operating Temperature	-40°C to 85°C
Mounting	Wall or Rack Mount
Communication Interfaces	Ethernet
Data Logging	Yes
Compliance	CE, RoHS