NTI ENVIROMUX Series User Manual

NTI ENTERPRISE ENVIRONMENT MONITORING SYSTEM
41
Figure 39- Sensor Configuration Page (3)
Attach image captured from an
IP camera to include with alert
sent via email.
This feature is available for all
sensors connected to either
the “RJ45 Sensor” ports or
“Digital In” sensors.
See “Alert Notifications” on
page 43 for more.
In E-5D, these are combined
into one device option, to
enable or disable the
Siren/Beacon connected to the
“Alarm” terminals on the
E-5D.
This feature is not present in
the E-2D.
When using SMS messaging, if
special characters (other than
English) are desired, in order to
receive them via SMS, the language
setting of the E-xD must be set to any
language other than English (see
Language Selection, page 60) -OR-
Change the format in your modem
settings from Plain Text to PDU (page
70 ) .

NTI ENVIROMUX Series Specifications

General

Product Type	Environmental Monitoring System
Temperature Range	-40°C to 85°C
Power Supply	12V DC or 24V AC
Network Interface	Ethernet 10/100 Mbps
Alarm Notifications	Email, SNMP
Sensor Types Supported	Temperature, Humidity, Water, Airflow
Power	12V DC or 24V AC
Operating Temperature	-40°C to 85°C
Mounting	Wall or Rack Mount
Communication Interfaces	Ethernet
Data Logging	Yes
Compliance	CE, RoHS