NTI ENVIROMUX Series User Manual

NTI ENTERPRISE ENVIRONMENT MONITORING SYSTEM
34
Alert Notifications
The alert can be configured to notify one or more users via email, SNMP traps (v1,v2c, v3), Syslog messages, or SMS alerts. It
can also activate an audible siren, or an alarm beacon. Alerts are also indicated on the "Int Alert" or "Ext Alert " LEDs on the
front of the ENVIROMUX and in the WEB interface.
When SMS alerts is enabled, the user has to option to enable the customization of the SMS message. Select "Send custom
SMS" and enter up to 160 characters) to be sent with an SMS Alert.
Outputs
Each power supply can be associated with one of the connections labeled "Output Relays" (see page 14 or 54), and that
connection can be set to “active” or “inactive” pertaining to the state of the contacts of the relay either on alert, or when returning
to normal. The tamper can also block the output command generated by the alert. In this way other devices can be controlled
by power supply alerts.

NTI ENVIROMUX Series Specifications

General

Product Type	Environmental Monitoring System
Temperature Range	-40°C to 85°C
Power Supply	12V DC or 24V AC
Network Interface	Ethernet 10/100 Mbps
Alarm Notifications	Email, SNMP
Sensor Types Supported	Temperature, Humidity, Water, Airflow
Power	12V DC or 24V AC
Operating Temperature	-40°C to 85°C
Mounting	Wall or Rack Mount
Communication Interfaces	Ethernet
Data Logging	Yes
Compliance	CE, RoHS