NXP Semiconductors MPC5777C - Page 50

M_CAN_IE field descriptions (continued)
Field Description
6
BOE
Bus_Off Status Interrupt Enable
0 Interrupt disabled
1 Interrupt enabled
7
EWE
Warning Status Interrupt Enable
0 Interrupt disabled
1 Interrupt enabled
8
EPE
Error Passive Interrupt Enable
0 Interrupt disabled
1 Interrupt enabled
9
ELOE
Error Logging Overflow Interrupt Enable
0 Interrupt disabled
1 Interrupt enabled
10
BEUE
Bit Error Uncorrected Interrupt Enable
0 Interrupt disabled
1 Interrupt enabled
11
BECE
Bit Error Corrected Interrupt Enable
0 Interrupt disabled
1 Interrupt enabled
12
DRXE
Message stored to Dedicated Rx Buffer Interrupt Enable
0 Interrupt disabled
1 Interrupt enabled
13
TOOE
Timeout Occurred Interrupt Enable
0 Interrupt disabled
1 Interrupt enabled
14
MRAFE
Message RAM Access Failure Interrupt Enable
0 Interrupt disabled
1 Interrupt enabled
15
TSWE
Timestamp Wraparound Interrupt Enable
0 Interrupt disabled
1 Interrupt enabled
16
TEFLE
Tx Event FIFO Element Lost Interrupt Enable
0 Interrupt disabled
1 Interrupt enabled
17
TEFFE
Tx Event FIFO Full Interrupt Enable
0 Interrupt disabled
1 Interrupt enabled
Table continues on the next page...
Memory Map and Register Description
MPC5777C Reference Manual Addendum, Rev. 1, 12/2015
50 Freescale Semiconductor, Inc.