1.3 Audience
This addendum is intended for system software and hardware developers and applications
programmers who want to develop products with maskset 2N45H of the MPC5777C. It is
assumed that the reader understands operating systems, microprocessor system design,
basic principles of software and hardware, and basic details of the Power Architecture®
developed by Freescale.
1.4 Document organization
This document contains two chapters whose content differs from the corresponding
chapters of the MPC5777C Reference Manual:
• Platform Configuration Module (PCM)
• Modular CAN (M_CAN)
These addendum chapters describe the indicated modules for maskset 2N45H. The
corresponding chapters of the MPC5777C Reference Manual describe the indicated
modules for maskset 3N45H.
Conventions
1.5.1 Numbering systems
The following suffixes identify different numbering systems:
This suffix Identifies a
b Binary number. For example, the binary equivalent of the number 5 is written 101b. In some cases,
binary numbers are shown with the prefix 0b.
d Decimal number. Decimal numbers are followed by this suffix only when the possibility of confusion
exists. In general, decimal numbers are shown without a suffix.
h Hexadecimal number. For example, the hexadecimal equivalent of the number 60 is written 3Ch. In
some cases, hexadecimal numbers are shown with the prefix 0x.
1.5
Audience
MPC5777C Reference Manual Addendum, Rev. 1, 12/2015
8 Freescale Semiconductor, Inc.
To Next Page
Loading...
Need help?
General
