Oki Data CONFIDENTIAL
3. MAINTENANCE MENUS
45762101TH Rev.1
3-10
3.3 Maintenance Utility
3.3.1 Maintenance Utility
The adjustments described in table 3-1 should be made by using Maintenance Utility.
The following details the utility:
(1) Maintenance Utility Operating Manuals:
42678821FU01 Rev.1 (Version 1.0.0) or higher(Japanese)
42678821FU02 Rev.1 (Version 1.0.0) or higher (English)
(2) Maintenance Utility program:
Applicable operating system File name Part number
Windows XP / Vista / 7 / 8 42678821FW01.zip 42678821FW01 Rev.1 (Version 2.0.0) or
higher
Table 3-1: Adjustment options in Maintenance Utility
Option Adjustment
Section in
Maintenance
Utility
Operating
Manual
Operation from
operator panel
(section in this
maintenance
manual)
1 Board
replacement
Copies information in the EEPROM in the PU block,
and the settings in the EEPROM in the CU block.
Purpose: To copy the above data onto a CU/PU
board with which to replace the CU/PU board for a
maintenance purpose.
3.1.1 Unavailable
2 Serial
number
setting
Rewrites the serial number recorded in the PU
block and selects and rewrites the printer serial
number recorded in the CU block and rewrites the
output mode recorded in it.
Purpose: To configure a maintenance replacement
CU/PU board onto which the CU/PU board
information cannot be copied with the board
replacement function (e.g. due to an interface error).
3. 2 .1 Unavailable
Option Adjustment
Section in
Maintenance
Utility
Operating
Manual
Operation from
operator panel
(section in this
maintenance
manual)
3 Factory/
Shipping
mode
Switches between the Factory and Shipping modes.
Purpose: To configure a maintenance replacement
CU/PU board onto which the CU/PU board
information cannot be copied with the board
replacement function (e.g. due to an interface
error). The maintenance board is put to the
Factory mode usually by default and, by using this
function, must be set to the Shipping mode.
3.2.3 3.4.2.8
4 MAC
address
setting
Sets the MAC address. 3.2.2 Unavailable
5 Send to file Send the specify file. 3.1. 2 Unavailable
6 Password
initialization
Initializes a Password. 3.2.5
7 Network log
storage
Stores a network log file. 3.3.1 Unavailable
8 PU log
storage
Stores a PU log file 3.3.2 Unavailable
9 PU
maintenance
log storage
Saves a PU maintenance log file. 3.3.3 Unavailable
10 Test print Executes the local print function and sends a
specified file.
Purpose: To check the printer for operation it
performs solely and send a download file.
3.4 Perform local
printing (refer
to System
Specification).
11 CU log
storage
Saves a local print data. 3.3.4 Unavailable
Note! Do not operate or set options added with ‘Never use this option,’ or a
malfunction is potentially caused.
Before starting the maintenance, please disable MPS mode setting when the
unit activate MPS mode as Enable. The condition of MPS mode is displayed
on the header of Configuration pages as "MPS : OFF/ON".
To Next Page
Loading...
Need help?
General
