Oki MB472w - 4.2 Part Replacement Procedure

45762101TH Rev.1
4-4
Oki Data CONFIDENTIAL
4.REPLACEMENT OF PARTS
4.2 Part replacement procedure
This section describes the procedure for replacing the parts and assemblies shown in the
disassembly diagrams below.
4.2.1 Cover Side (L)
(1) Remove the cassette assembly.
(2) Open the Scanner, Cover-Assy-Stacker, Frame-Assy-MPT and Cover-
Assy-Rear.
(3) Unlatch the claws (10 portions) with to pull the front side of the mainbody
to the arrow in figure to detach the Cover-Side (L)
①
.
Cover-Assy-Stacker
Ca
ver-Assy-Rear
Fr
ame-Assy-MPT
Scanner
①
= Points of craws