Oki MB472w - Adjustment at Part Replacement; EEPROM Data Upload; Download Method

Oki Data CONFIDENTIAL
45762101TH Rev.1
3-25
3. MAINTENANCE MENUS
3.4.3 Adjustment at part replacement
Adjustment is necessary while replacing the following part.
Replacing part Adjustment
Main PCB board EEPROM data upload / download
3.4.3.1 EEPROM data upload / download method
In the case of replacing the Print Board of Controller, copy the old EEPROM content to
the new EEPROM of new board and then save the customer setting. To operate this,
use Maintenance Utility.
About the operating method of Maintenance Utility, refer to Maintenance Utility
Operating Specification.
Maintenance Utility is designed for working place engineer use only. It is not released to
the end user.
Refer to Maintenance Utility Manual about Board Replacement.