Oki MB472w - Lever in Sensor; Lever WR Sensor; Photo Interrupter

45762101TH Rev.1
4-47
Oki Data CONFIDENTIAL
4.REPLACEMENT OF PARTS
4.2.28 Lever In Sensor / Lever WR Sensor / Photo Interrupter
(1) Separate the Front Assy. (Refer to 4.2.23)
(2) Separate the Roller-Pressure and Roller Regist. (Refer to 4.2.26)
(3) Remove two screws (Black)
①
. Remove the Holder-Sensor
②
.
(4) Remove the Lever-In-Sensor
③
. Remove the Spring-Sensor
④
.
(5) Remove the Lever-WR-Sensor
⑤
. Remove the Spring-Sensor
⑥
.
(6) Remove two Photo Interrupter
⑦
.
(7) Installing is performed by the inverse procedure with removing.
Note!
1. Beware of not to touch the DC motor inattentively (Do not rotate motor).
2. Make sure that the latch B of Holder-Sensor
②
has engaged the latch A
of the Front.
⑦
①
①
②
③
④
⑤
⑥
B
A