Oki MB472w - Duplex Belt Assy; DC Motor

45762101TH Rev.1
4-29
Oki Data CONFIDENTIAL
4.REPLACEMENT OF PARTS
4.2.12 Duplex Belt Assy
(1) Take out the Frame-Assy-TR. (Refer to 4.2.11)
(2) Remove the cassette and place the printer unit with its right side down.
(3) Remove the E-ring (RE4-SK)
①
and slide the Shaft-Dup-Clutch in the
direction of the arrow.
(4) Raise the printer unit and remove the screw (Silver)
②
and Frame-Duplex-
Assy
③
.
(5) Remove the four pieces of Bearing
④
, Roller-Feed-Duplex
⑤
and Duplex-
Belt
⑥
.
(6) Installing is performed by the inverse procedure with removing.
④
⑤
②
③
④
⑥
Shaft-Dup-Clutc
h
4.2.13 DC Motor
(1) Remove the Cover Side (R). (Refer to 4.2.2)
(2) Remove the screw (Silver)
①
, and remove FG-Cable
②
.
(3) Remove the PlateShield (CU) . (Refer to 4.2.3)
①
②