Oki MB472w - Printer-Unit; Cover-Assy-Stacker

45762101TH Rev.1
4-61
Oki Data CONFIDENTIAL
4.REPLACEMENT OF PARTS
⑪
-1 Printer-Unit
EM-30LP Class F
Apply a normal amount of
MOLY KOTE (EM-30LP) to the
whole circle of gear teeth of 1
place.
⑪
-2 Printer-Unit
Plate-Assy-Side-R
EM-30LP Class B
Apply a normal amount of MOLY KOTE
(EM-30LP) to the sliding surface with
Drum Shaft. (hatched areas)
⑫
Cover-Assy-Stacker
HANARL SF-133 Class C
Lever-Lock-Button sliding surface
(All circumderence of the hatching portion)
Leave it for about 30minutes (drying time) after painting HANARL
SF-133, and then Assemble the Lever-Lock-Button.
HANARL SF-133 should not protrude outside from the exterior surface.