Oki MB472w - Tray-Assy-Document

45762101TH Rev.1
4-68
Oki Data CONFIDENTIAL
4.REPLACEMENT OF PARTS
2) Case-Hinge-L
⑥
Tray-Assy-Document
Tray-Document
3) Case-Hinge-R
EM-D110 Class C
Apply a normal amount of
MOLYKOTE (EM-D110) to the
hatched area. (4 surface)
Between two ribs
Concave portion
Concave portion
3.5
3.5
EM-D110 Class C
Apply a normal amount of
MOLYKOTE (EM-D110) to the
hatched area. (4 surface)
3.5
3.5
Between two ribs
Two ribs and
Outside 3.5mm of
Two ribs.
Concave portion
Concave portion
SF-133 Class C
Apply a normal amount of HANARL
(SF-133) to the hatched area.
(3 sliding surfaces)
SF-133 Class C
Apply a normal amount of HANARL
(SF-133) to the hatched area.
(3 sliding surfaces)
Leave it for about 3minutes (drying time) after painting HANARL SF-133,
and then assemble the Tray-Assy-Document