Oki MB472w - Roller Regist; Roller Feed Assy

45762101TH Rev.1
4-46
Oki Data CONFIDENTIAL
4.REPLACEMENT OF PARTS
4.2.26 Roller Regist
(1) Separate the Front Assy. (Refer to 4.2.23)
(2) Remove two screws (Black)
①
and Plate-Feed-B
②
.
(Be careful not to lose the gear that is removed with the plate.)
(3) Remove the Gear-Idle-MPT
③
. Remove the Gear-Reduction-MPT
④
.
(4) Remove the E-ring (RE5-SK)
⑤
. Remove the Regist-Gear
⑥
.
(5) Remove the Gear-Pressure
⑦
.
(6) Remove the screw (Black)
⑧
. Remove the Plate-Contact-REG
⑨
.
(7) Remove the two screws (Black)
⑩
. Remove the Holder-Regist-L/R
⑪
.
(8) Remove the Roller-Pressure
⑫
. Remove the Roller-Regist
⑬
.
(9) Installing is performed by the inverse procedure with removing.
Note! Beware of not to touch the DC motor inattentively (Do not rotate
motor).
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑩
⑪
⑪
⑫
⑬
4.2.27 Roller Feed Assy
(1) Separate the Front Assy. (Refer to 4.2.23)
(2) Remove two screws (Black)
①
and Plate-Feed-B
②
.
(Be careful not to lose the gear that is removed with the plate.)
(3) Remove two screws (Black)
③
. Separate the Regist Assy.
(4) Remove two screws (Silver)
④
. Remove the Frame-Hopping-Upper
⑤
(Four claws)..
(5) Remove two Gear-Roller-Feed
⑥
. Remove two Bush-Feed
⑦
.
(6) Remove two Roller-Feed-Assy
⑧
.
(7) Installing is performed by the inverse procedure with removing.
Note! Beware of not to touch the DC motor inattentively (Do not rotate
motor).
①
②
③
③
④
⑤
⑥
⑦
⑧
⑧
Regist Assy