45762101TH Rev.1
7-7
*1 : Network factory defaults: "Admin Setup" - "Network Menu" - "Network Setup" - "Factory
Defaults"
: It is executed to reset only network settings to the factory defaults make settings again
due to unsuccessful network access.
*2 : (Undefined number)
*3 : Flash Memory format: "Admin Setup" - "Management" - "Flash Memory Setup" - "Format
Partition"
*4 : (Undefined number)
*5 : FLASH initialization: "Admin Setup" - "Management" - "Flash Memory Setup" - "Initialize"
*6 : Language initialization: "Admin Setup" - "Management" - "Language Maint Setup" -
"Initialize"
: This menu is executed when users want to delete downloaded language data and reset
the display language back to English temporarily.
*7 : Reset Settings: "Admin Setup" - "Management" - "Reset Settings"
: This menu is executed to reset the device settings (including network settings) back to the
defaults temporarily and make settings again when device operation is unstable, etc.
*8 : Erase Privacy Data: "Admin Setup" - "User Install" - "Erase Privacy Data"
: Not displayed when Job Accounting is operating.
: Users must execute this menu with "Flash Memory Setup" - "Initialize" before disposing of
the device to prevent personal information from leaking.
*9 : Main counter reset: "Admin Setup" - "Management" - "Print Statistics" - "Reset Main
Counter"
: Not displayed in MPS mode.
*10 : Consumable replacement reset: "Admin Setup" - "Management" - "Print Statistics" - "Reset
Supplies Counter"
: Not displayed in MPS mode.
*11 : Job log deletion: "Admin Setup" - "Management" - "Job Log Setup" - "Clear Job Log"
: This menu is executed when users want to delete only the usage history of the device.
*12 : (Undefined number)
*13 : Format Flash ROM: "Service Maintenance" - "System Maintenance" - "Format Flash
Memory"
*14 : Reset Admin Password: "Service Maintenance" - "System Maintenance" - "Reset Admin
Password"
: This menu is used to initialize only the administrator password by support when users
forget the administrator password.
*15 : ALL RESET: "Service Maintenance" - "System Maintenance" - "All Reset"
: Not displayed in MPS mode.
: This menu must be executed to delete customer information before dealers etc. lend
devices to the next customers.
*16 : OKIUSER change: "Service Maintenance" - "System Maintenance" - "OKIUSER"
: Not displayed in MPS mode.
*17 : Country code change: "Admin Setup" - "Fax Setup" - "Fax Setting" - "Country Code"
*18 : Settings are initialized when their defaults are changed due to changes in destinations or
country codes.
*19 : Only "File Name", "Template" under "Admin Setup" - "Scanner Setup" - "E-mail Setup" is
initialized.
*20 : (Undefined number)
*21 : No means is provided to change the setting of the print statistic password.
*22 : Executing Format Flash ROM displays the total number of replacement retained in the CU
FW of the device.
Consumable replacement information (toner/drum/belt/fuser) in a print statistic report
shows a calculation result of the formula "actual PU replacement - CU display difference =
replacement information."
Format Flash ROM clears the value of "CU display difference."
*23 : "PS Setup" - "L1 Tray" cannot be initialized by "Reset Settings"/"ErasePrivacy Data"/"All
Reset."
*24 : In this item, the following Counters that belongs to Job Accounting's maintenance category
is showed.
Total Color A4/Letter Impressions
Total Mono A4/Letter Impressions
Total ADF Pages Scanned [A4/Letter Conversion]
Total Pages Scanned [A4/Letter Conversion]
*25 : "Admin Setup" - "Management" - "System Setup" - "Access Control" is NOT included. The
resetting condition is same as
「
Access control information registration data
」
.
*26 : "Service Maintenance" - "Print Maintenance" - "Dot Shift" is NOT resetted.
*27 : "Erase Privacy Data" would NOT be showed in panel menu if Job Accounting is enabled.
*28 : JobLog be deleted during reboot, for the item of JobLog's [store/no store] be resetted to [no
store].
To Previous Page
Loading...
