45762101TH Rev.1
2-4
2. TROUBLESHOOTING PROCEDURES
No. Category
PJL
Status
Code
Error Warning Description
5 Initializing - 1
2
3
4
5
%STORAGE% Error: %ERRCODE%
To %STORAGE%
format, select [Format]
To shut down, select [Cancel]
%ERRCODE% : 0
Indicates that the unformatted
storage is detected during the
initializing.
%ERRCODE% : 250
Indicates that machine
detected broken file about
secure print.
Needs to format once again.
[Format] pressed, Storage
format is started and the unit is
rebooted automatically.
[Cancel] pressed, the unit is
shut down.
---------------------------------
The following is changed by a
status parameter.
%STORAGE% :
Multimedia Card
%ERRCODE% :
Error Code
6 Initializing - 1
2
3
4
5
Status Mode Displays that normal Online
mode starts.
Data (Job) from an external
portion is processed even
though an error takes place
after Online (ready) state
once this mode starts.
Displays Error or Warning on
a panel.
This function is secret to
users. Therefore, this status
does not occur in a user
environment.
7 Shutdown - 1
2
3
4
5
Shutdown in progress.
Please wait. The machine
turns off automatically.
It is shown that a unit is
shutting down.
Normal
No. Category
PJL
Status
Code
Error Warning Description
1 Normal 40988 1
2
3
4
5
PU downloading ... Downloading PU F/W (This is
not user-level error)
This function is secret to
users. Therefore, this status
does not occur in a user
environment. It occurs during
downloading firmware of
option tray.
2 Normal 40825 1
2
3
4
5
Wait a moment.
Message Data processing ...
Indicates that message
data to be updated is being
processed.
3 Normal 40826 1
2
3
4
5
Wait a moment.
Message Data writing ...
Indicates that message data
to be updated is being written.
4 Normal 40827 1
2
3
4
5
Power OFF/ON
Message Data written OK.
Indicates that message data
to be updated has been
written successfully.