45762101TH Rev.1
2-24
2. TROUBLESHOOTING PROCEDURES
No.
Category
PJL Status
Code
Error Warning Description
54 Error 40587 1
2
3
4
5
Please install new Image Drum Unit
Please see Help for details.
The life of the image drum
(Error 347)
55 Error 411y y
yy: paper size
1
2
3
4
5
Please install paper on MP Tray.
Please set paper
(%MEDIA_SIZE%).
To cancel, select [Cancel]
Manual paper feed is
required. Manually insert
the paper shown by
%MEDIA_SIZE%.
Error 500
56 Error - 1
2
3
4
5
Memory Overflow Rx Indicates that the fax
Memory Overflow was
occurred during fax
receiving.
57 Error 40778 1
2
3
4
5
Memory Overflow
Please see Help for details.
Close
Display that Memory
Overflow is occurred
during PC Fax Job
receiving.
Return to Mode Selection
screen by the pressing
OK key.
58 Error 482yy
483yy
1
2
3
4
5
Tray Media Mismatch:
%ERRCODE%
Please install
paper(%MEDIA_SIZE%
%MEDIA_TYPE%) on %TRAY%.
The media type in the tray
and the print data do not
match.
Load paper that was set
in %MEDIA_SIZE% and
%MEDIA_TYPE% in tray.
%TR AY%
Tray1 Error 461
Tray2 Error 462
59 Error 480yy 1
2
3
4
5
Tray Media Mismatch:
%ERRCODE%
Please install
paper(%MEDIA_SIZE%
%MEDIA_TYPE%) on %TRAY%.
The media type in the tray
and the print data do not
match.
Load paper that was set
in %MEDIA_SIZE% and
%MEDIA_TYPE% in tray.
%TR AY%
MP Tray Error 460
No.
Category
PJL Status
Code
Error Warning Description
60 Error 482yy
483yy
485yy
1
2
3
4
5
Tray Media Mismatch:
%ERRCODE%
Please install
paper(%MEDIA_SIZE%
%MEDIA_TYPE%) on %TRAY%.
The size of paper or
media type in the tray
does not match the print
data.
Load paper that was set
in %MEDIA_SIZE% and
%MEDIA_TYPE% in tray.
%TR AY%
Tray1 Error 461
Tray2 Error 462
The paper size displaying
form of the custom mode
is the same as above.
61 Error 480yy 1
2
3
4
5
Tray Media Mismatch:
%ERRCODE%
Please install
paper(%MEDIA_SIZE%
%MEDIA_TYPE%) on %TRAY%.
The size of paper or
media type in the tray
does not match the print
data.
Load paper that was set
in %MEDIA_SIZE% and
%MEDIA_TYPE% in tray.
%TR AY%
MP Tray Error 460
62 Error 30097 1
2
3
4
5
Memory Overflow: 420
Please see Help for details.
Close
Memory capacity
overflows due to the
following reason.
Decrease the data
amount.
- Too much print data in a
page.
- Too much Macro data.
- Too much DLL data.
- After frame buffer
compression, over flow
occurred.