45762101TH Rev.1 
2-28
2. TROUBLESHOOTING PROCEDURES
No.
Category
PJL Status 
Code
Error Warning Description
8 Error 40057 1 
2 
3 
4 
5
Inspection is required. 
%ERRCODE%:Error %CODE%
A fatal error occurred. 
For more information, see 
"Service Calls List." 
%ERRCODE%: specifies 
3 digits (decimal) error 
code. 
'%CODE%' specifies 
error code that is the 
detailed error cause. (2 
digits, hexadecimal) 
The message of fatal 
error is specified by 
English only.
9 Error 40057 1 
2 
3 
4 
5
Power OFF/ON 
%ERRCODE%:Error
A fatal error occurred. 
For more information, see 
"Service Calls List." 
%ERRCODE%: specifies 
3 digits (decimal) error 
code. F0C, F0D, FFE, 
and FFF are hexadecimal 
code. 
The message of fatal 
error is specified by 
English only.
10 Error 40057 1 
2 
3 
4 
5
Power OFF/ON 
%ERRCODE%:Error
A fatal error occurred. 
For more information, see 
"Service Calls List." 
%ERRCODE%: specifies 
3 digits (decimal) error 
code. 
The message of fatal 
error is specified by 
English only.
11 Error 40787 1 
 
2 
3 
4 
5
Power OFF/ON
Carriage Error <%CODE%> 
 
 
 
Indicates that it is 
carriage error. 
%CODE% : details
=2 
:
  Home position error 
(carriage connection 
error)
=3 
:
  Defective detecting 
black edge
No.
Category
PJL Status 
Code
Error Warning Description
12 Error 40057 1 
2 
3 
4 
5
Power OFF/ON 
%ERRCODE%:Error 
%FATALSTRING1%
A fatal error occurred. 
For more information, see 
"Service Calls List." 
%ERRCODE%: specifies 
3 digits (decimal) error 
code. 
'%FATALSTRING1%' 
specifies error code 
that is the detailed error 
cause. 
The message of fatal 
error is specified by 
English only.
13 Error 40057 1 
2 
3 
4 
5
%ERRCODE%:Error 
%FATALSTRING2%
A fatal error occurred. 
For more information, see 
"Service Calls List." 
%ERRCODE%: specifies 
3 digits (decimal) error 
code. 
'%FATALSTRING2%' 
specifies error code 
that is the detailed error 
cause. 
The message of fatal 
error is specified by 
English only.
14 Error 40057 1 
2 
3 
4 
5
Power OFF/ON 
%ERRCODE%:Error %CODE%
A fatal error occurred. 
For more information, see 
"Service Calls List." 
%ERRCODE%: specifies 
3 digits (decimal) error 
code. 
'%CODE%' specifies 
error code that is the 
detailed error cause. 
The message of fatal 
error is specified by 
English only.