3-26 Service Manual
ADF paper present sensor test
This test should be used if the ADF fails to feed paper when a scan is performed. To test this sensor perform the
following steps:
1. In the sensor test menu, press or to scroll to the ADF paper present test.
2. press Select ().Starting Test displays. ADF Paper: Closed displays.
3. press the ADF paper present sensor actuator (A) the top of the ADF unit. ADF Paper: Open should
display if the sensor is working properly.
4. press Back ( ) to exit the test and return to the Scanner sensor tests.
Y112730-2
To Next Page
Loading...
Need help?
General
