3-38 Service Manual
SE Menu
Note: This is not the Fax SE menu. To enter the Fax SE menu, press **411 from the Ready screen.
Note: This menu should be used as directed by second-level support.
Print SE Menus
General
Copyright - Displays copyright information.
Optra Forms mode - On or off
Code Revision Info
Network Code Level - Displays network code level
Network Compile Info - Displays compile information
Printer Code Level - Displays printer code information
Printer Compile Info - Displays compile information
History
Print History
Mark History
History Mode
MAC
Set Card Speed
LAA
Keep Alive
NVRAM
Dump NVRAM
Re-init NVRAM
NPAP
Print Alerts
TCP/IP
netstat -r
arp -a
Allow SNMP Set
MTU
Meditech Mode
Raw LPR Mode
Gather Debug
Enable Debug
Y112730-2
To Next Page
Loading...
Need help?
General
