2-8 Service Manual
Remove Paper ADF
This posts when there is paper detected in the ADF upon POR or when the cover is
closed (or any other situation that re-inits the scanner). Message clears when paper
is removed.
Remove Paper
Standard Bin
The standard output bin is full or nearly full. Remove the media from the bin.
Remove Packaging
Material
Packaging material is detected by the printer. Remove the packaging material and
press Continue.
Unplug and Change
Mode
Camera is not in a proper mode to use the PictBridge feature. Unplug the camera
cable to the printer, and change the camera mode.
Replace Black Imaging
Unit
Replace the Black Imaging Unit.
Replace Color Imaging
Unit
Replace the Color Imaging Unit.
Replace <color>
Cartridge
Replace the toner cartridge of the indicated color. The printer continues after the
toner door is closed.
Std Bin Full The following actions can be taken:
• Remove paper from the standard exit bin to clear the message and continue
printing.
•Press Select ( ) to clear the message and continue printing.
Tray <x> Empty The following actions can be taken:
• Load the paper tray or other source with the correct paper type and size.
•Press Stop ( ) and then press Select ( ) to cancel the current job.
Tray <x> Low Load the paper tray or other source with the correct paper type and size.
Tray <x> Missing Insert the specified tray into the printer.
Unplug and Change
Mode
Camera is not in a proper mode to use the PictBridge feature. Unplug the camera
cable to the printer, and change the camera mode.
Unsupported Mode Camera is not in a proper mode to use the Pict Bridge feature. Unplug the camera
cable to the printer and change the camera mode.
Unsupported USB
Device, Please Remove
Remove the unrecognized device from the USB port on the front of the printer.
Unsupported USB Hub,
please remove
Remove the unrecognized USB hub/device from the USB port on the front of the
printer.
Waiting The printer has received data to print, but is waiting for an End-of-job command, a
Form Feed command, or additional data.
The following actions can be taken:
•Press Select ( ) to print the contents of the buffer.
• Cancel the current print job.
Waiting, too many
events
Wait for the message to clear.
Warning—Potential Damage: Do not turn the printer off while this message appears
on the display.
Waste Toner Box The waste toner bottle is nearly full. Press Select ( ) to clear the message and
continue printing.
30.xx <color> Toner
Cart Missing
The specified toner cartridge is missing. Re-install the missing toner cartridge to clear
the message, and then continue printing. If the message recurs remove and re-install
the cartridge. Listen for the click to ensure the cartridge is installed properly. Close
the front cover.
User status and attendance messages (continued)
User primary message Explanation
Y112730-2
To Next Page
Loading...
Need help?
General
