1247
Text String Processing Instructions Section 3-33
Variations
Applicable Program Areas
Operands S1: Base Text String
S2: Inserted Text String
S3: Beginning Position (0000 to 0FFF hex or &0 to &4095)
Note 1. The data from S1 to S1 + the maximum 2,047 words, from S2 to S2 + the
maximum 2,047 words, and from D to D + the maximum 2,047 words must
be in the same area.
2. The data from S2 to S2 + the maximum 2,047 words and from D to D + the
maximum 2,047 words cannot overlap. The data from S1 to S1 + the max-
imum 2,047 words and from D to D + the maximum 2,047 words can over-
lap. The data from S1 to S1 + the maximum 2,047 words and from S2 to
S2 + the maximum 2,047 words can also overlap.
INS$(657)
S1
S2
S3
D
S1: Base text string first word
S2: Inserted text string first word
S3: Beginning position
D: First destination word
Variations Executed Each Cycle for ON Condition INS$(657)
Executed Once for Upward Differentiation @INS$(657)
Executed Once for Downward Differentiation Not supported
Immediate Refreshing Specification Not supported
Block program areas Step program areas Subroutines Interrupt tasks
OK OK OK OK
15 0
S1
to
Text string data: 4,095 characters max. + NUL
S1 + maximum 2,047 words
15 0
S2
to
Text string data: 4,095 characters max. + NUL
S2 + maximum 2,047 words
15 0
D
to
Text string data: 4,095 characters max. + NUL
D + maximum 2,047 words
To Next Page
Loading...
