1081
Network Instructions Section 3-25
3-25-8 EXPLICIT SET ATTRIBUTE: ESATR(722)
Purpose Sends an information write command in an explicit message (Set Attribute
Single, Service Code: 10 hex).
This instruction is supported only by CS/CJ-series CPU Unit Ver. 2.0 or later.
Ladder Symbol
Variations
Applicable Program Areas
ESATR(722)
S
C
S: First word of send message
C: First control word
Variations Executed Each Cycle for ON Condition ESATR(722)
Executed Once for Upward Differentiation @ESATR(722)
Executed Once for Downward Differentiation Not supported
Immediate Refreshing Specification Not supported
Block program areas Step program areas Subroutines Interrupt tasks
OK OK OK OK
To Next Page
Loading...
