1361
Revision History
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.
Revision code Date Revised content
01 February 1999 Original production
02 October 1999 Revisions and additions for version–1 CPU Units. See page 118 for a list.
03 May 2000 Revisions and changes as follows:
Page xiii: Precaution added.
Page 8: Note removed.
Pages 162, 166, 177, 180, 183, 189, 196, 198, 262, 531, 560, and 705: Index registers
removed from operand specifications.
Page 170: Sentence starting “An error will occur if a JMP0(515)” removed.
Pages 178, 181, and 184: Precaution on timer numbers added and precaution on use in
program jumps changed.
Page 181: Precaution on refreshing Completion Flag added.
Pages 179, 182, 184: Precaution on refreshing changed.
Page 554: Parenthetic information removed from precaution.
Pages 576, 577, 579, 581, and 583: Description changed to include CS1W–INT01.
Page 578: Note added on using CLI with MSKS.
Pages 578 and 583: Interrupt priority precaution changed.
Pages 639, 647, 651, and 655: Serial port designation changed.
Page 642: Manual reference added.
Page 675: Information on file structure added.
Page 709: Precaution added on long cycle times.
04 November 2000 Revisions and changes as follows:
Pages 169 and 170: Precaution related to the cycle time deleted.
Pages 176, 180, 183, 186, 196, 199, 743, 746, and 749: Timer number, counter number,
and set value indications corrected.
Pages 189 and 192: PV and SV range indications corrected.
Pages 209 and 210: Ladder program modified and caution deleted.
Page 342: Description about the CLEAR CARRY instruction deleted from precautions.
Page 395: ON condition of Error Flag rewritten.
Page 531: PID constant update timing designation added to the diagram.
Pages 533 and 534: Description on PID added to the end of description and example.
Page 536: Bit 01 of C+5 added to the table.
Pages 567, 572, 730, 732, 788, and 791: Note under the flags table deleted.
Page 580: Note 1 at the top of the page changed.
Page 613: CIO addresses changed.
Page 704: FAL numbers in operands table changed.
05 May 2001 Name of manual changed, “CS1 Series” changed to “CS Series” or “CS/CJ Series,” CJ-
series PCs added, and “CS Series only” added to specified restricted functions.
Other changes and additions for the above were made to the following pages: xv, 2, 661,
667, 678,
Page 116: Section 3-2 removed.
Pages 589, 590, 594, and 595: Information added for S and D.
Page 598: Headings changed.
06 October 2001 New products added to the manual, including the new High-speed CPU Units (CS1-H and
CJ1-H CPU Units) and the new instructions they support. (Extensive changes too numer-
ous to list.)
06A February 2002 Page 666: Bit specifications in Control data column for Bits 04 to 07 of C+6 and Bits 00 to
03 of C+6 reversed.
Cat. No. W340-E1-16
Revision code
To Next Page
Loading...
Need help?
General
