Oracle SL150 - Page 192

cartridge (continued)
types, 6-3
view list, 6-6
volume ID, 6-3
certificate, 4-12
self-signed, 4-12
third-party, 4-12
certifying authority, 4-12
change password, 5-1
change role, 5-3
checksum, 4-11
cleaning
cartridge exterior, 6-8
configuration, 7-4
host-managed, 7-5
library managed, 7-5
manual, 7-8
cleaning cartridge, 6-5, 6-15, 6-16
clip for shipping, 10-26
clip nuts, 2-18
close mailslot, 6-14
code
See firmware
column, A-1
configuration
example, 1-15, A-2
SAS issues, 9-13
wizard, 4-1
configure
accessibility, 4-13
apply changes, 4-9
bridge drive, 4-4
certificate, 4-12
date and time, 2-37, 4-4
drive auto clean, 4-4
drive cleaning, 7-4
element addressing mode, 2-37, 4-4
initial power-on, 2-34
label format, 4-4
library, 4-1
library settings, 4-4
LME, 4-8
mailslot, 2-38, 4-4
partition, 4-4, 4-5
port 1, 2-36, 4-2
port 2, 4-2
reserved slot, 2-38, 4-4
restore defaults, 9-12
SNMP, 8-4
volume label format, 2-38
contaminants, 2-2
control panel
remove/replace, 10-7
controller
remove/replace, 10-10
CRU, 10-1, 10-2, 10-25
D
data cartridge, 6-5
date, 2-37, 4-4
default admin, 2-35
delete partition, 4-7
delete user, 5-3
diagnose, 8-3, 9-8
diagnostic cartridge, 6-5, 6-15
dimensions, 1-7
download
firmware, 4-10
MIB, 8-6
drive
See tape drive
drive tray
See tape drive
E
eject cartridges
See export
electrostatic discharge, 2-3
element addressing mode, 2-37, 4-4
email notification, 8-7
encryption, 1-12
about LME, 7-2
configuration, 4-8
enter cartridges
See import
environmental requirements, 2-1
Ethernet, 2-32
expanded mailslot
See mailslot
expansion module
about, 1-3
accessory kit, 2-16
back rails, 2-22
cabling, 2-29
clip nuts, 2-18
install, 2-15
magazine, 2-23
mounting, 2-21
remove cartridge magazines, 2-19
remove/replace, 10-17
securing to rack, 2-23
expired cleaning cartridge, 6-16
export, 6-13
cartridges, 6-12, 6-13
table, 3-2
Index
Index-2