Parker Compax3 User Manual

Compax3 Accessories
C3I12T11
338
192-120113 N08 C3I12T11 - December 2010
10.2.3. Mains filters
In this chapter you can read about:
Mains filter for PSUP30 ..................................................................................................338
Mains filters serve for reducing the low-frequency interferences on the mains side.
10.2.3.1 Mains filter for PSUP30
Required mains filter for the PSUP30: 0.45 mH / 55 A
We offer the following mains filters:
 LCG-0055-0.45 mH (WxDxH: 180 mm x 140 mm x 157 mm; 10 kg)
 LCG-0055-0.45 mH-UL (with UL approval) (WxDxH: 180 mm x 170 mm x
157 mm; 15 kg)
Dimensional drawing: LCG-0055-0.45 mH
Dimensional drawing: LCG-0055-0.45 mH-UL

Parker Compax3 Specifications

General

Protection Class	IP20
Control Modes	Torque, Speed, Position
Feedback Options	Incremental encoder, Absolute encoder, Resolver
Communication Interfaces	CANopen, EtherCAT, Profinet
Safety Features	STO (Safe Torque Off), SS1 (Safe Stop 1), SOS (Safe Operating Stop)
Input Voltage	200-480 VAC
Relative Humidity	5% to 85% (non-condensing)
Shock Resistance	According to EN 60068-2-27
Operating Temperature	0°C to +40°C