Parker Compax3 User Manual

Setting up Compax3
C3I12T11
152
192-120113 N08 C3I12T11 - December 2010
4.1.18. Configuration name / comments
Here you can name the current configuration as well as write a comment.
Then you can download the configuration settings or, in T30 or T40 devices,
perform a complete Download (with IEC program and curve).
Caution!
Deactivate the drive before downloading the configuration software!
Please note!
Incorrect configuration settings entail danger when activating the drive.
Therefore take special safety precautions to protect the travel range of
the system.
Mechanical limit values!
Observe the limit values of the mechanical components!
Ignoring the limit values can lead to destruction of the mechanical
components.

Parker Compax3 Specifications

General

Protection Class	IP20
Control Modes	Torque, Speed, Position
Feedback Options	Incremental encoder, Absolute encoder, Resolver
Communication Interfaces	CANopen, EtherCAT, Profinet
Safety Features	STO (Safe Torque Off), SS1 (Safe Stop 1), SOS (Safe Operating Stop)
Input Voltage	200-480 VAC
Relative Humidity	5% to 85% (non-condensing)
Shock Resistance	According to EN 60068-2-27
Operating Temperature	0°C to +40°C