Parker Compax3 User Manual

Compax3 Accessories
C3I12T11
336
192-120113 N08 C3I12T11 - December 2010
10.2.2. Motor output filter
In this chapter you can read about:
Motor output filter MDR01/04 .........................................................................................336
Motor output filter MDR01/01 .........................................................................................336
Motor output filter MDR01/02 .........................................................................................337
Wiring of the motor output filter ......................................................................................337
We offer motor output filters for disturbance suppression when the motor
connecting cables are long (>20m):
Order code for motor output filter (for Compax3S, Compx3M >20m motor cable)
/
up to 6,3 A rated motor current
MDR 0 1 / 0 4
Up to 16 A rated motor current
MDR 0 1 / 0 1
Up to 30A A rated motor current
MDR 0 1 / 0 2
Larger motor output filters are available on request!
10.2.2.1 Motor output filter MDR01/04
up to 6.3A nominal motor current (3.6mH)
Dimensional drawing:
120
54
95
5
90
40
170
U1 V1 W1 + - U2 V2 W2 + -
10.2.2.2 Motor output filter MDR01/01
Up to 16 A nominal motor current (2mH)
Dimensional drawing:
150
67
95
6
113
50
195
U1 V1 W1 + - U2 V2 W2 + -

Parker Compax3 Specifications

General

Protection Class	IP20
Control Modes	Torque, Speed, Position
Feedback Options	Incremental encoder, Absolute encoder, Resolver
Communication Interfaces	CANopen, EtherCAT, Profinet
Safety Features	STO (Safe Torque Off), SS1 (Safe Stop 1), SOS (Safe Operating Stop)
Input Voltage	200-480 VAC
Relative Humidity	5% to 85% (non-condensing)
Shock Resistance	According to EN 60068-2-27
Operating Temperature	0°C to +40°C