EasyManuals Logo

Pentair INTELLITOUCH User Manual

Pentair INTELLITOUCH
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #124 background imageLoading...
Page #124 background image
IntelliTouch
®
Control System User’s Guide
114
Glossary (Continued)
PersonalityBoard: The circuit board mounted on top of the Outdoor Control Panel motherboard. The
Personality board denes the system capabilities.
PersonalityKit: Set of parts to dene the capability of a system. Can include, temperature sensors,
actuators, and additional relays, actuators.
PowerCenter: Same as Load Center with the exception of the circuit breaker base.
RelayCircuits: The circuits that control the relays on the Personality Board. Connectors on top edge of
the circuit board.
ScrewTerminalConnector: Removable connector that may attach to circuit board with multiple
sockets (anywhere from 2 to 12) to receive wires from controllers and sensors; wires held by screw
terminals; multiple wires of a small enough gauge (usually 22 AWG) may be coupled to a single socket
of a terminal connector.
Transceiver: Circuit board with attached antenna that can send and receive radio frequency (wireless)
transmissions.
ScrewTerminal: Removable connector that may attach to circuit board with multiple sockets
(anywhere from 2 to 12) to receive wires from controllers and sensors; wires held by screw terminals;
multiple wires of a small enough gauge (usually 22 AWG) may be coupled to a single socket of a
terminal connector.
SystemPersonality: The capability of a system to operate a set of equipment, independent of the kind
of controller or other accessories; system personalities include “shared equipment” (i5+3, i7+3, i9+3),
“dual equipment” (i10+3D), or “single body of water” (i5S+3, i9+3S).
TemperatureSensor:Specially designed probe for measuring temperature of the air or pool water; 10k
Ohm thermistor.
TerminalConnector: Removable connector that may attach to PCB with multiple sockets (anywhere
from 2 to 12) to receive wires from controllers and sensors; wires held by screw terminals; multiple
wires of a small enough gage (usually 22 AWG) may be coupled to a single socket of a terminal
connector.
Two-SpeedPumpRelay: Relay to toggle a two-speed pump from low-speed to high-speed operation;
does not turn pump on or off.
Transceiver:Special printed circuit board that can send and receive radio frequency (wireless)
transmissions.
QuickTouchQT4:Provides switching of up to four remote control circuits from a wireless Hand-held
Remote.
ValveModule: Accessory PCB (P/N 520285) to increase auxiliary actuator outputs from two to ve.

Table of Contents

Other manuals for Pentair INTELLITOUCH

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pentair INTELLITOUCH and is the answer not in the manual?

Pentair INTELLITOUCH Specifications

General IconGeneral
Remote AccessYes, via mobile app
Lighting ControlYes
AutomationYes
ExpandabilityYes
InterfaceTouchscreen, mobile app
Enclosure RatingNEMA 3R
User InterfaceTouchscreen
CompatibilityPentair equipment
ConnectivityEthernet, Wireless
Mobile ControlYes
Remote ControlYes
Communication ProtocolPentair proprietary
Control TypeAutomated

Related product manuals