Pentair INTELLITOUCH User Manual

IntelliTouch
®
Control System User’s Guide
15
Go to the PROGRAM/SELECT equipment screen. From this
screen you can select SPA, POOL or any of the AUX equipment
circuits to program.
1. Press the top right button next to POOL to access the
“Program” screen to program the pool equipment.
2. Tosetthestarttime: Press the left side button next to
HOURS (and the start ag icon) to set the start hour. Press the
right side button to set the minutes for the start time. To use
the “EGGTIMER” feature, see page 17.
3. Tosetthestoptime: Press the left side button to HOURS
(and the stop icon) to set the hour to stop the program. Press
the right side button to set the minutes for the stop time. To use
the “ONCE ONLY” feature, see page 16.
4. Press the left side button next to DAYSto specify the day(s) to
run the program one time. Choose “EVERYDAY” to run the
program one time each day of the ve days. To choose specic
days to run the program, press the button next to DAYS. The
days of the week screen displays. The LED lights next to the
days of the week will all be lit. To switch off a day, press the
button next to the displayed day. The light switches is off.
To set all day on, all lights should be on. Press Saveto save the setting. The previous screen will be
displayed.
5. Press Saveto save the current program. The program counter displays (1/1) indicating that you have
saved one (1) program for the selected circuit. To erase a program press the Clear button then Save.
6. Press the Back button to return to the SPA,POOLandAUX equipment selection screen to choose
other equipment. Press the Exitbutton to return to the main screen.
Smart Start (Setting up SAm, SAL and IntelliBrite lights)
SmartStart(SS_Yes/SS_No) - When a light circuit function is setup as
a SAM , SAL or IntelliBrite light, use the Smart Start feature (SS_Yes) to
automatically begin changing colors when the light circuit is switch
on. Smart Start can also be assigned to all other special light circuits
(i.e. Color Wheel, Photon Generator
®
, Light, see page 41).
1. Press the top right button next to SAMLIGHTto program the
light circuit. For this example the SAL LIGHT circuit name
has already been selected from the Circuit Names list (see
page 37).
2. SS_Yes/SS_No displays next to the light circuit name.
3. SmartStart displays at the bottom of the screen. Press the
button on the bottom of the screen to toggle between SS_Yes
and SS_No. SelectSS_Yes to automatically begin changing colors when the light circuit is switch on.
4. Setup each light circuit as described above in steps 2 - 5.
MENU PROGRAM
POOL
Getting There
(or any other circuit)
SS_NO
SMART
START
SS_YES
SAL LIGHT
SMART
START
SAVE
MENU/PROGRAM/SAM LIGHT
CLEARBACK

Pentair INTELLITOUCH Specifications

General

Remote Access	Yes, via mobile app
Lighting Control	Yes
Automation	Yes
Expandability	Yes
Interface	Touchscreen, mobile app
Enclosure Rating	NEMA 3R
User Interface	Touchscreen
Compatibility	Pentair equipment
Connectivity	Ethernet, Wireless
Mobile Control	Yes
Remote Control	Yes
Communication Protocol	Pentair proprietary
Control Type	Automated